FCOM video tutorials
Video shows re-configuration of an ECU using AS-BUILT data.
This video shows how to change instrument panel cluster (IPC) display from kilometers to miles on Ford Fiesta 2012. The procedure involves reconfiguring CCF configuration data in IPC ECU.
FCOM allows you to easily configure Cruise Control System (CCS) on many models. Once CCS is installed in vehicle, connect to BCM and simply reconfigure CCS option as shown in this video tutorial. This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit 2006-, Transit Connect 2013-, Transit Custom 2013-
FCOM supports both very old and the latest models. This video shows diagnostic session on 1993 Mondeo 2.5i using Ford EEC-IV system. The used diagnostic protocol is DCL/CART (Data communication link, Custom asynchronous receiver-transmitter). Unlike newer models diagnostics is available from "Special diagnostics" menu.
FCOM is capable of daytime running lights (DRL) reconfiguration. Ford vehicles support multiple national standards how DRL behave. With FCOM you're free to choose DRL behaviour you desire (please consult local road law first!) This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit 2006-, Transit Connect 2013
FCOM supports so called DTC Freeze frames. Every DTC is assigned variable set of environment data (such as mileage, battery voltage, engine speed, etc) at time of first DTC occurence. If multiple DTCs are present, ECU may record only first DTC freeze frame or only a subset of DTCs may contain freeze frame. Please note that pre-UDS (ISO14229) ECU freeze frame is mostly limited only to petrol engi
Video shows how to perform KOEO (Key-On Engine-Off) test. The test displays fault codes occured during the test. The PCM under test on the video has disconnected most components, thus a lot of errors.
FCOM supports configuration function to perform trailer module installation. You can easily configure trailer type in BCM configuration after the trailer module is installed. This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit Connect 2013-, Transit Custom 2013-
